楼主: 八极

[1830T 3820TG 4820TG] 【八极出品,必属精品】原创首发!1分钟让刷错BIOS黑屏不开机的4820tg5820tg起死回生

[复制链接]

该用户从未签到

发表于 2017-8-13 14:17 | 显示全部楼层
mark一下
留着备用

该用户从未签到

发表于 2017-8-13 17:38 | 显示全部楼层
八极出品,必属精品】原创首发!1分钟让刷错BIOS黑屏不开机的4820tg5820tg起死回生 [修改]
高级模式

该用户从未签到

发表于 2017-8-15 16:29 | 显示全部楼层
How to flash the BIOS: (for Insyde BIOS only)
You need to have some kind of storage media with BIOS recovery file on it. You can use USB flash drive, SD memory card (via built-in card reader) or CD to store BIOS recovery image. For Acer 4820/5820 BIOS recovery file name must be ZQ1X64.fd. This is very important, because if file name is different then it WILL NOT WORK.. Just copy the BIOS file to an >>empty<< USB drive or SD card (FAT16/FAT32 formatted) and you have created recovery media.

Then do the following:
The notebook must be turned off.
Plug in the thumbdrive into USB port or insert SD card into the card reader. They must have BIOS on them.
Press & hold Fn+Esc key while powering the notebook by pressing the power button. Keep holding the Fn+Esc key.
When you see laptop's LEDs flashing or notice activity on the thumbdrive's LED indicator, release Fn+Esc key.
The BIOS file will be read from USB drive into notebook's memory and flashing will begin. You will NOT see any activity. Screen will remain blank. This is completely normal.
Flashing process takes about 2-3minutes. Once BIOS flashing is complete, your notebook should automatically restart. Wait at least 5 to 10 minutes. Only interrupt the process if there is no response from the notebook for more than 10 minutes. If that is the case, then shutdown the notebook manually by pressing the power button. Power it on and see if the BIOS flash succeeded. If not, try the flashing process again with another USB stick and make sure you did all the steps correctly.

该用户从未签到

发表于 2017-8-15 16:29 | 显示全部楼层
供大家参考:
How to flash the BIOS: (for Insyde BIOS only)
You need to have some kind of storage media with BIOS recovery file on it. You can use USB flash drive, SD memory card (via built-in card reader) or CD to store BIOS recovery image. For Acer 4820/5820 BIOS recovery file name must be ZQ1X64.fd. This is very important, because if file name is different then it WILL NOT WORK.. Just copy the BIOS file to an >>empty<< USB drive or SD card (FAT16/FAT32 formatted) and you have created recovery media.

Then do the following:
The notebook must be turned off.
Plug in the thumbdrive into USB port or insert SD card into the card reader. They must have BIOS on them.
Press & hold Fn+Esc key while powering the notebook by pressing the power button. Keep holding the Fn+Esc key.
When you see laptop's LEDs flashing or notice activity on the thumbdrive's LED indicator, release Fn+Esc key.
The BIOS file will be read from USB drive into notebook's memory and flashing will begin. You will NOT see any activity. Screen will remain blank. This is completely normal.
Flashing process takes about 2-3minutes. Once BIOS flashing is complete, your notebook should automatically restart. Wait at least 5 to 10 minutes. Only interrupt the process if there is no response from the notebook for more than 10 minutes. If that is the case, then shutdown the notebook manually by pressing the power button. Power it on and see if the BIOS flash succeeded. If not, try the flashing process again with another USB stick and make sure you did all the steps correctly.

该用户从未签到

发表于 2017-8-15 16:32 | 显示全部楼层
How to flash the BIOS: (for Insyde BIOS only)
You need to have some kind of storage media with BIOS recovery file on it. You can use USB flash drive, SD memory card (via built-in card reader) or CD to store BIOS recovery image. For Acer 4820/5820 BIOS recovery file name must be ZQ1X64.fd. This is very important, because if file name is different then it WILL NOT WORK.. Just copy the BIOS file to an >>empty<< USB drive or SD card (FAT16/FAT32 formatted) and you have created recovery media.

Then do the following:
The notebook must be turned off.
Plug in the thumbdrive into USB port or insert SD card into the card reader. They must have BIOS on them.
Press & hold Fn+Esc key while powering the notebook by pressing the power button. Keep holding the Fn+Esc key.
When you see laptop's LEDs flashing or notice activity on the thumbdrive's LED indicator, release Fn+Esc key.
The BIOS file will be read from USB drive into notebook's memory and flashing will begin. You will NOT see any activity. Screen will remain blank. This is completely normal.
Flashing process takes about 2-3minutes. Once BIOS flashing is complete, your notebook should automatically restart. Wait at least 5 to 10 minutes. Only interrupt the process if there is no response from the notebook for more than 10 minutes. If that is the case, then shutdown the notebook manually by pressing the power button. Power it on and see if the BIOS flash succeeded. If not, try the flashing process again with another USB stick and make sure you did all the steps correctly.

该用户从未签到

发表于 2017-8-16 13:06 | 显示全部楼层
谢谢楼主分享,学到了

该用户从未签到

发表于 2017-8-29 21:25 | 显示全部楼层
萨大萨达所多

该用户从未签到

发表于 2017-9-11 23:07 | 显示全部楼层
技术贴,感谢分享!!

该用户从未签到

发表于 2017-9-15 15:11 | 显示全部楼层
我也不知道我的笔记本是不是出了这个问题,每次都是第一次开不了机,重启才行

该用户从未签到

发表于 2017-9-17 22:12 | 显示全部楼层
很好

该用户从未签到

发表于 2017-9-19 10:07 | 显示全部楼层
使用这种方法的前提是BIOS的启动主模块部分没有损坏吧!

该用户从未签到

发表于 2017-9-29 09:41 来自手机 | 显示全部楼层
我也遇到这个问题,不知道能不能解决,试一下

该用户从未签到

发表于 2017-10-26 20:02 | 显示全部楼层
试试看吧 反正不型了

该用户从未签到

发表于 2017-10-31 22:41 | 显示全部楼层
学习学习,我的电脑黑屏了

17年8月精华宗师

了解更多>>

acer退市笔记本论坛

关注本友会

  • 本友会微信公众号
  • VR微信公众号
  • benyouhui2012
  • VR伐木累
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|Archiver|手机版|意见反馈|acer论坛 ( 北京市公安局海淀分局网监中心备案编号:11010802020118  

GMT+8, 2017-11-25 15:36 , Processed in 0.207177 second(s), 11 queries , Memcache On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表

每月活动不重样
请为我打call 关注试客公众号:it168sk